HP OFFICEJET 4500 Guide De Mise En Marche Rapide page 22

Mac OS
1. Connect a USB cable to the port on the
back of the printer and then to any USB
port on the computer.
2. Place the HP software CD into the
computer.
Step 2: Test the wireless connection
To test the wireless connection and make
sure it is working properly, complete the
following steps:
1. Make sure the printer is turned on and
paper is loaded in the tray.
2. Press the
3. Press the
Print Report, and then press OK.
22 Set up wireless (802.11) communication (some models only)
(Setup) button.
or buttons to select
3. Double-click the HP Installer icon on the
software CD, and then follow the
onscreen instructions.
4. When prompted, enter the network
name and security passkey.
5. After the software is installed,
disconnect the USB cable.
Connecting without
a wireless router
If you do not have a wireless router
(such as a Linksys wireless router
or Apple AirPort Base Station), you
can still connect the printer to your
computer using a wireless connection
(known as a "computer-to-computer" or
an "ad hoc" wireless connection).
For more information, see the
user guide.
4. Select Wireless Test, and then press OK.
After the test is finished, the printer prints a
report with the results of the test. If the test
fails, review the report for information on
how to fix the problem and rerun the test.
For additional troubleshooting information,
see "Wireless (802.11) setup problems" on
Page 27.