HP OFFICEJET 4500 Guide De Mise En Marche Rapide page 12

If you want to configure this setting...
Distinctive Ring
Change the answer ring pattern for
distinctive ring
Note: If you are using a distinctive
ring service, you can use more than
one telephone number on the same
telephone line. You can change
this setting to enable the printer to
determine automatically which ring
pattern it should use for fax calls only.
Fax Speed
Set the fax speed used to communicate
between the printer and other fax machines
when sending and receiving faxes.
Note: If you experience problems
sending and receiving faxes, try using
a lower fax speed.
Fax Error Correction Mode
If the printer detects an error signal during
the transmission and the error-correction
setting is turned on, the printer can request
that a portion of the fax be resent.
Note: If you have problems sending
and receiving faxes, turn off error
correction. Also, turning off this setting
might be useful when you are trying to
send a fax to another country/region
or receive a fax from another country/
region or if you are using a satellite
phone connection.
Volume
Change the volume of the printer sounds,
including the fax tones.
12 Fax
...do this:
1. Press the or
Fax Settings, and then press OK.
2. Select Ring Pattern or Distinct Ring.
3. Select the setting that matches the
pattern that the telephone company
assigned to your fax number, and then
press OK.
1. Press the or
Fax Settings, and then press OK.
2. Select Fax Speed.
3. Select the desired fax speed, and then
press OK.
1. Press the or
Fax Settings, and then press OK.
2. Select Error Correction, and then
press OK.
3. Select On or Off.
1. Press the or
Basic Settings, and then press OK.
2. Select Speaker Volume.
3. Select the desired volume, and then
press OK.
buttons to select
buttons to select
buttons to select
buttons to select