Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8. FUNCTION STATISTICS AND RANGES
Item
Windows
1
SEX
2
AGE
3
WEIGHT
4
HEIGHT
5
TIME
6
DISTANCE
7
CALORIES
8
SPEED
9
PULSE
10
RPM
11
BRAKE RESISTANCE
LEVEL
12
USER
30
S1RiB_Manual_Bilingual.indd 30-31
Display Range
Default
Stored
MALE/ FEM
Male
Yes
10 - 100
30
Yes
20 - 330(Lb)
70
Yes
10 - 150(KG)
70
36 - 84(INCH)
70
Yes
90 – 210(CM)
175
0:00 - 99:59
0: 00
No
0.0 - 99.99
0.0
No
0 - 999
0
No
0.0 - 99.9
0.0
No
30 - 200 bpm
0
No
0 - 250 rpm
0
No
L1 - L24
L1
No
U0-U4
U0
Yes
DOWNLOADING APPS AND
PAIRING YOUR DEVICE WITH YOUR EQUIPMENT
DOWNLOADING THE SOFTWARE
Connect the Apple device with the App Store (iTunes) or your Android Device with Google Play, search
for "Pafers", then read the APP introductions and Download the APPs with bicycle/elliptical machine
functions to your device. Note: if you download an APP for a treadmill and pair it with an Elliptical it will
not work.
•
The App uses bluetooth mode, so please make sure the machine and device you are using has the
optional DUALKIT installed. See BH DualKit installation on this page.
•
The App contains the following functions, the user must open a 3G network or wi-fi network:
(a) Managing Data - After completing the registration in the "Pafers" App, log on to your personal account.
Now that you have registered you can record all of your workout data and save it to your device.
(b) Some APPs need connection to Google maps in order to function correctly.
BH DUALKIT INSTALLATION
1. To Access iConcept compatible apps, an optional (purchased separately) BH DualKit Module is re-
quired.
INSTALLATION:
1.) Take out the Phillips Locking Screw from the slot on the back of the console and set aside.
2.) Select the appropriate BH DualKit Module. On the front of the module, it will say the machine type
and on the back of the module it will say if it is a SMART or CLASSIC type. There are 3 types of modules:
a.) Bike & Elliptical - Classic
b.) Treadmill - Classic
c.) BH DualKit - Works for all machine types
3.) Make sure the USB part is extended from the module.
- Push up on the sides of the DualKit Module (Fig. 1)
- The USB Port should extend out of the bottom of the module (Fig. 2)
4.) Push the module in the slot at the back of the console (Fig. 3)
5.) Once the module is plugged in, take the Phillips Locking Screw previously set aside and screw it in
behind the module to secure.
Fig. 1
Fig. 2
Fig. 3
31
11/1/2016 10:59:11 AM
Publicité
Chapitres
Table des Matières
