Safety Components - Wella Professionals VISIONAIR Mode D'emploi

2 Your safety is important to us
Wall arm type and mounting elements
Temperature monitoring
2.1 Continued
Improper use • The appliance must not be operated with the hairdryer dome 2 or filter
cover with air filter b.
• The appliance must not be covered by towels or similar items.
• Do not treat the face or other parts of the body.
• Do not treat animals.
• The appliance may not be used to dry objects or heat food.
Pedestal type • The appliance may only be mounted on the pedestal ST5.
• The appliance may only be mounted on the wall arm n Acrobat 2004 type
WA04/75 or WA04/95.
• The wall arm n may only be mounted on a wall bracket o type WL04 that
has been installed as described in the currently valid installation instructions.

2.2 Safety components

• An overheat protection switch switches off the appliance heating if the
maximum temperature is exceeded. See "Section 6, Errors and possible
rectification, page 45''.
CAUTION: In order to avoid a hazard due to inadvertent restting of the thermal
cutout (safety switch for protection against excessive temperature), this
appliance must not be supplied through an external switching device, such as a
timer, or connected to a curcuit that regularly switched on and off by the
utility.
Safety off • After a maximum operating time of 60 minutes, the appliance turns off
automatically. See "Section 6, Errors and possible rectification, page 45''.
33