Wella Professionals VISIONAIR Mode D'emploi page 25

Thank you very much
Welcome
Qualified staff
Conversions or modifications
In the case of problems
Thank you very much
for purchasing the new Visionair hairdryer. Please read through these operating
instructions carefully before using the equipment. This will allow you to take
advantage of all the features of the new Visionair and protect yourself and others
from any harm.
Please keep these operating instructions within reach of the equipment so that
you can look up any questions you might have concerning operation of the
equipment, matters of safety and other important information.
These operating instructions are part of the equipment. Please do not pass on the
equipment to another user or another location without the operating instructions.
These operating instructions must always be easily accessible to every user of the
equipment.
Welcome
The appliance and these instructions are designed for use by qualified
•
hairdressers who are familiar with the purposes of hair treatment from their
professional training and who have a corresponding approval (in states in
which statutory regulations make such an approval necessary).
• The equipment's construction and design are state-of-the-art and it is safe to
use when operated in accordance with all the instructions and safety
information contained in these operating instructions.
Nevertheless, hazards may still occur with this device, in particular if it is used
by staff without sufficient training and experience, if it is not used properly or
contrary to the safety information contained in these operating instructions, or
not in accordance with its intended purpose.
• Train staff in the operating, cleaning and care of the equipment, on the basis of
these operating instructions.
Unauthorised conversions or modifications of the equipment are not permitted
•
for reasons of safety.
Unauthorised conversions or modifications to the equipment invalidate the
manufacturer's warranty. The manufacturer assumes no liability for damage or
injuries resulting from unauthorised conversions or modifications or the use of
spare parts that are not originals.
Using parts that are not supplied by the manufacturer or his representatives
invalidates the warranty for the equipment.
ONLY USE GENUINE SPARE PARTS!
• If you encounter problems that are not covered by these operating
instructions, please contact your nearest Wella Customer Service immediately
for your own safety and that of your customers.
You can find the address and telephone number of your nearest Wella
•
Customer Service Centre at www.wella.com.
Visionair is a Wella brand.
•
All other trademarks mentioned in these operating instructions are the sole
property of the relevant manufacturers.
27