GARDEO PRO GRO20V20WIFI-2A Traduction Des Instructions D'origine page 121

Robot tondeuse
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. After having programmed the zones, place the robot 50cm in front of the charging
station and do not switch it off. It will wait there until the start time is reached, then
start mowing.
7. There will be an "
Please note:
a) The starting point should be selected in such a way that it is located in the center of the sub-
area to be mowed.
b) The minimum distance between two boundary wires should be more than 100 cm.
c) The sub-area function divides the mowing areas in up to three different sub-areas. However,
this does not mean that the mower mows only within the sub-area. It can also switch to and from
between the individual areas.
d) If battery is low during the sub-area function, and the mower returns automatically to the
charging station, after completing the charging operation, it returns from there to the place where
it had stopped earlier.
Subareas are interrupted as follow:
1. Press "Home" button on the screen or activiating the shelter function during raining, the
machine will go the the charging station. Then the function of subarea is finished.
For the next mowing, the mower will start from the first subarea and recount time.
2. If due to low battery, the mower will go to the charging station, at the same time, record the
present subarea and working time, after finishing charging, the mower will return the same
subarea and finish the rest.
3. If the schedule time is over, the mower will go to the charging station. The mower will go to
the same subarea until it reaches the schedule time.
Note: The maximum work time is limited to 255 min. With a net work time of 255 min.
charging time is not included
" mark in the interface of the main page.
121

Publicité

Table des Matières
loading

Table des Matières