GARDEO PRO GRO20V20WIFI-2A Traduction Des Instructions D'origine page 114

OPERATION
1. OPERATION OF DISPLAY SCREEN
• Put the mower on the fence line in front of the charging station distance within 0.5 meter and
the mower head face to the charging station.
•Press the power button the screen shows "ENTER PIN CODE", input initial password
(0000), then press "OK" to enter the operation interface.
(Press "+/-" key to switch the number, press "ok" to confirm the number)
• Press "START" to turn on the mower.
• Mower go ahead and extruding poles of the mower touch the paddles of the charging station ,
the indicator light on the charging station turns to red, then mower go off the fence and start to
mow.
How it works?
1) The robot mower will cut inside fence line first.
2) When the battery is low, the mower will go to the charge station for charging automatically,
after first fully charged, it will mow along the fence line.
3) After that, after every 8 times charging, the mower will cut along the fence line automatically.
(If customer press power " " button, it will erase the history counting and start over).
• Press "MENU" to set function
114