GARDEO PRO GRO20V20WIFI-2A Traduction Des Instructions D'origine page 113

4. Charging:
The mower can be charged in the charging station. The extruding poles of the mower should
be in contact with the respective paddles of the charging station. The mower will find its way
to the station for charging automatically when it needs to recharge.
Lights on the charging station, there are two lights(①&②) in the charging station:
①
If the light is red: the robot mower is charging.
If the light is green: charging finished, the robot mower will stand 2-3cm back towards
charging station if not in working mode.
If the light is off: no power, please check the connection between adapter and charging
station.
②
If the light is flashing: the connection between charging station and fence line is loosen,
please check the connection and fence line status.
If the light is off: after assemble the fence line, the light will be off if the assemble is right.
Note:
•
The charger plugs must be well connected to the charging station and tighten the nuts.
•
The battery must be fully charged before first use.
•
The two paddles of the charging station are electrified (21V DC)
•
To avoid short circuit, they must never be touched with conductor when the charger is connected to
the charging station.
113