3. Choose "Settings" to define the starting points for up to three different areas in
your garden
1. Choose"Settings" , press "START" and the mower will move along the boundary wire
away from the charging station.
2. The screen no longer displays "START" but "NEXT" instead. Follow your mower
along the boundary the starting point for area 1. Now press "NEXT" on the screen to
define the first starting point. The mower confirms the first starting point with "OK".
The mower moves further along the boundary wire. As soon as you have reached the
starting point for area 2 on the boundary wire, press "NEXT" again. The mower
confirms the second starting point with OK and moves further on the boundary wire.
As soon as you have reached the starting point for area 3, press "NEXT" again.
3. When you have confirmed the third starting point, the display on the screen changes
from "NEXT" to "END". By pressing "END" you are confirming the three starting points
for the individual areas. The mower will then go back to charging station automatically.
If not, please turn off the mower, and put it in front of the charging station(facing the
charging station); turn it on then set the work hours.
118