Accessories And Spare Parts; Ordering Original Schuberth Parts - SCHUBERTH M1 PRO Manuel

H. ACCESSORIES AND SPARE PARTS
Caution:
The installation of a communication system (including basic headsets)
constitutes a modification to the helmet. For this reason it is necessary
for any communication system and headset intended for installation into a
specific model of helmet to be tested and approved in line with the ECE-R
22.05 European helmet standard, otherwise the helmet's approval and
compliance with insurance requirements become invalid on installation.
Evidence of approval in line with ECE-R 22.05 in connection with a
specific communication system is only valid if certified by an official
regulatory office of an EU member state. Any other form of information
from these or other institutions (e.g. on the general suitability of
communication systems for use in motorcycle helmets) is of no relevance
and the helmet will lose its approval.

2. ACCESSORIES AND SPARE PARTS

An overview of all available accessories and spare parts can be found on the
Internet at WWW.SCHUBERTH.COM
We recommend that you only use original SCHUBERTH accessories and spare
parts for your SCHUBERTH helmet as they are specially adapted to your helmet
model.
Caution:
For safety reasons, all other parts of the helmet should only be replaced by
your specialist dealer.

3. ORDERING ORIGINAL SCHUBERTH PARTS

Please contact your specialist dealer for original SCHUBERTH accessories and
replacements. To find your nearest SCHUBERTH specialist dealer, please go to
WWW.SCHUBERTH.COM
64