Handling - MC Crypt ME-120 SC Notice D'emploi

Connection and Control Elements
(20) SHIFT button
• Press this button together with another button to trigger the additional function (indicated in a square above or
below the respective button).
(21) HEADPHONE connection
• Connect your headphones here.
(22) MIC INPUT connection
• Connect your microphone here.
(23) MASTER OUT connection
• Connect your playback amplifier here.
(24) A and B controllers
• When the scratch function is active, the jog wheels (19) will switch into scratch operation starting at a certain
speed (touch sensitive).
• The reaction sensitivity of the jog wheels (19) is set separately for each channel with these controllers.
(25) USB connection
• You can connect a free USB interface of your computer to this input.
Through this connection, the device is supplied with power and communications with the computer.
(26) MIC VOLUME control
• Use this control to set the volume for microphone playback.

Handling

• Never operate the device immediately after bringing it from a cold to a warm room. The resulting condensation
could destroy the device.
Allow the appliance to reach room temperature. Wait until the condensation water has evaporated.
• Remove the USB plug when you are not using the device for an extended period.
• For safety reasons, do not operate the device in thunderstorms.
• Do not listen to excessively loud music over an extended period of time. This may damage your hearing. This
especially applies when using headphones.
35