Maintenance; Troubleshooting - MC Crypt ME-120 SC Notice D'emploi

Maintenance

Regularly check the technical safety of the controller e.g. for a damaged housing.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediately and make
sure it is not unintentionally operated. remove the USB plug!
It must be assumed that safe operation is no longer possible if:
• the device shows visible damage
• the device no longer works
• the device has been stored for a long time under unfavourable conditions or
• after the device has been exposed to extraordinary stress caused by transport
Always observe the following safety instructions before cleaning or servicing the controller:
Live components may be exposed if covers are opened or components are removed.
The device must be disconnected from all power sources before any servicing or repair work
is carried out.
Capacitors inside the device may still carry voltage even though they have been disconnected
from all power sources.
Only qualified experts familiar with the hazards involved and the relevant regulations may
perform repairs.
The device should only be cleaned with a soft, dry cloth or brush from the outside.
Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the housing.

Troubleshooting

In purchasing the Mc Crypt MP3/DJ Controller ME-120 SC, you have acquired a reliable product which has been
designed using state-of-the-art technology.
Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible faults here:
Please observe the safety notes!
36