Connection - MC Crypt ME-120 SC Notice D'emploi

Connection

For connecting the USB interface, only use the included or another suitable USB line. Using the
wrong cables can cause interferences.
To connect the outputs, use shielded cables only. The use of other cables might cause
interferences.
To avoid distortions or mismatches which could damage the device, only connect devices with
the same connection type.
• Connect the connection of your headphones to the connection HEADPHONE (21). If the plug of your headphones
does not fit, you can purchase the respective adapters in specialist retail stores.
• Connect the audio output MASTER OUT (23) to active speakers or an amplifier with speakers.
The white cinch socket conducts the left channel signal.
The red cinch socket conducts the right channel signal.
• Connect your microphone to the MIC INPUT socket (22).
• Switch on your computer and wait until the operating system is completely booted.
• Connect the USB socket (25) to a free USB port of your computer.
• Now your operating system recognises the new hardware and automatically installs the required device drivers.
• After installation of drivers, the respective message appears
25