Guarantee - V-ZUG NOBLESSE 51028 Mode D'emploi

Display following power failure
An interruption to the power supply is only
displayed if the freezer temperature is
warmer than -9°C after restart. In this case
the two temperature displays flash and
show the temperature values that were
measured after restart. You can stop the
temperature displays flashing by pressing
any button. The current average tempera-
ture values are then displayed.
Sensor error functions:
– Sensor error F1 on the left-hand side of
temperature display = temperature sen-
sor in the cold room is defective
- Error message F4 on the right-hand tem-
perature display (freezer temperature) =
temperature sensor in the freezer defec-
tive.
– Sensor error F7 on the right-hand side of
temperature display = surrounding room
temperature sensor defective
36
Emergency mode
If a sensor error (F1 or F4) is displayed, the
entire unit continues to operate in a time-
controlled emergency mode independently
of the defective sensors.

Guarantee

We warrant the guarantee as of the delivery
date of the appliance to the end user.
Any malfunctions which might occur
during this time despite correct operation
and which are caused by material or const-
ruction errors will be corrected under this
guarantee by our customer service.
Not covered by the guarantee:
– LED defects
– Breakage of the glass shelves or polymer
parts
– Defects resulting from not following the
operating instructions or incorrect usage
– Damage claims beyond the guarantee
– Appliance which have been repaired by
third parties.