Malfunctions; Guarantee - V-ZUG IDEAl Mode D'emploi

Masquer les pouces Voir aussi pour IDEAl:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

baked products, ready-made meals,
dairy products, meat and sausages.
– In the suspended trays from top to
bottom: butter and cheese, tubes,
small cans and eggs, large bottles.
– In the vegetable compartment: vegeta-
bles, fruit and salad.
Changing the LED lighting
Switch off the power supply: pull out
the power supply plug or deactivate
the fuse.
Click off the LED lighting (Figure &).
Disconnect the plug to the LED lighting
(Figure (). Please insert the new LED
lighting in the reverse sequence.
N.B.: Please only use original LED
lighting from the manufacturer.
&
(

Malfunctions

The appliance is checked for trouble-free
operation before being supplied. Should
you have any problems please contact your
nearest service facility, advising them of
the model number and the details of the
problem. A malfunction can occur if the
electrical fuse is tripped. This problem can
be solved easily if the fuse mechanism is
re-activated.
Display following power failure
After interruption on the power supply the
temperature display flashes and shows the
temperature value that measured after
restart. You can stop the temperature dis-
play flashing by pressing any button. The
current average temperature value is then
displayed.
Sensor error functions:
– Sensor error F1 on the left-hand side of
temperature display = temperature sen-
sor in the cold room is defective
– Sensor error F7 on the right-hand side of
temperature display = surrounding room
temperature sensor defective

Guarantee

We warrant the guarantee as of the delivery
date of the appliance to the end user.
Any malfunctions which might occur
during this time despite correct operation
and which are caused by material or con-
struction errors will be corrected under this
guarantee by our customer service.
Not covered by the guarantee:
– LED defects
– Breakage of the glass shelves or polymer
parts
– Defects resulting from not following the
operating instructions or incorrect usage
– Damage claims beyond the guarantee
– Appliance which have been repaired by
third parties.
33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ideal 929Ideal 930

Table des Matières