Malfunctions - V-ZUG NOBLESSE 51028 Mode D'emploi

Be careful that products do not come
■
into contact with the rear wall of the
cold room so that they do not freeze to
it and that, during defrosting, water
does not get diverted into the cold
room.
When filling be careful that:
■
– Oil and fats do not come into contact
with the polymer parts and the door
seals.
– The coldest locations in the cold room
for any setting of the temperature
controller are at the back wall and
above the lowest shelf. Sensitive prod-
ucts should therefore be put on the
lowest shelf.
Example of how to use:
■
– Freeze and store foodstuffs and make
ice in the freezer compartment.
– On the shelves from top to bottom:
baked products, ready-made meals,
dairy products, meat and sausages.
– In the suspended trays from top to
bottom: butter and cheese, tubes,
small cans and eggs, large bottles.
– In the vegetable compartment: vegeta-
bles, fruit and salad.
Changing the LED lighting
Switch off the power supply: pull out
the power supply plug or deactivate
the fuse.
Click off the LED lighting (Figure
Disconnect the plug to the LED lighting
(Figure ). Please insert the new LED light-
8
ing in the reverse sequence.
N.B.: Please only use original LED
lighting from the manufacturer.
7
8

Malfunctions

The appliance is checked for trouble-free
operation before being supplied. Should
you have any problems please contact your
nearest service facility, advising them of
the model number and the details of the
).
7
problem.
A malfunction can occur if the electrical
fuse is tripped. This problem can be solved
easily if the fuse mechanism is re-activated.
35