Malfunctions - V-ZUG PRESTIGE 51026 Mode D'emploi

Changing the LED lighting
Switch off the power supply: pull out
the power supply plug or deactivate
the fuse.
Click off the LED lighting (Figure 8).
Disconnect the plug to the LED lighting
(Figure 9). Please insert the new LED
lighting in the reverse sequence.
N.B.: Please only use original LED
lighting from the manufacturer.
8
9
44

Malfunctions

The appliance is checked for trouble-free
operation before being supplied. Should
you have any problems please contact your
nearest service facility, advising them of
the model number and the details of the
problem.
A malfunction can occur if the electrical
fuse is tripped. This problem can be solved
easily if the fuse mechanism is re-activated.
Display following power failure
An interruption to the power supply is only
displayed if the freezer temperature is war-
mer than -9°C after restart. In this case the
two temperature displays flash and show
the temperature values that were measu-
red after restart. You can stop the tempe-
rature displays flashing by pressing any
button. The current average temperature
values are then displayed.