Quick Start - Teuco SEASIDE T07 Manuel De L'utilisateur

QUICK START

Once the system has been powered up, the Waterlight (illuminated waterfall), Sunlight and moonlight functions can be
activated by pressing a single button at the control panel .
When theTimer setting elapses, the system shuts off and the display reverts to STaND-By .
DiSiNFECTiON of the system is not carried out (see DiSiNFECTiON) .
To cut the function short press QUiCK STaRT a second time or use the remote control (see REmOTE
CONTROl:preliminary operations); the system shuts off and the display reverts to STaND-By .
ALARM
The alaRm can be activated directly from the control panel .
The alarm locks up the system, shutting off any functions currently selected, and can also activate a bell or other sounder,
provided that this is already installed (see directions for installing the tub) .
SEASIDE
SEASIDE
To start the functions, press the "QUiCK STaRT" button .
The functions start and the display shows:
The exact time .
The temperature of the water in the tub .
The duration of the function (TimER) in minutes .
Waterlight in progress .
To make adjustments, use the remote control
(see REmOTE CONTROl) .
To activate the alarm, press the "alaRm" button .
To reset the system, press the QUiCK STaRT button or the
i/O button on the remote control;
the display reverts to STaND-By mode and the system
shuts off .
3 0 3 6 ° C
2 0 : 3 0
w a t e r l i g h t
Display indicating Waterlight
in progress
3 0 3 6 ° C
2 0 : 3 0
w a t e r l i g h t
Display indicating Waterlight
in progress
2 0 : 3 0
Display in STAND-By mode
a l a r M
Display indicating "ALARM"
status
2 0 : 3 0
Display in STAND-By mode
9
9
EN
IT