Waterlight Function - Teuco SEASIDE T07 Manuel De L'utilisateur

To cut the session short, press the WaTERliGHT button a second time; the system shuts off and the display reverts
to REaDy .
FUNCTION DOES NOT START!!!
SEASIDE
SEASIDE

WATERLIGhT function

Special bath essences made by Teuco can be used
when the waterfall is in operation.
Do not use soaps, bath oils or other foamable products.
STARTING ThE WATERLIGhT
pressing the "O/i" button to switch on,
the display goes into REaDy mode .
Press the "WaTERliGHT" button to activate the function .
The function starts up and the display shows:
The exact time .
The temperature of the water in the tub .
The duration of the session (TimER) in minutes (adjustable) .
Waterlight in progress .
When theTimer setting elapses, the system shuts off and the
display reverts to STaND-By .
if the message "aDD WaTER" is displayed, fill the tub to the
level at which the selected massage is able to start .
EN
3 6 ° C
2 0 : 3 0
r e a D Y
Display indicating
READy status
3 0 3 6 ° C
2 0 : 3 0
w a t e r l i g h t
Display indicating
Waterlight in progress
3 6 ° C
2 0 : 3 0
r e a D Y
Display indicating
READy status
a D D
w a t e r
Display in
DIAGNOSTICS mode
15
15
IT