Operation; Functions By Remote Control; Perineal Cleaning Function; Anal Cleaning Function - Roca In-Wash In-Tank A803094001 Mode D'emploi

3. OPERATION

❚

3.1 FUNCTIONS BY REMOTE CONTROL

3.1.1 PERINEAL CLEANING FUNCTION

By selecting this function the nozzle is activated in the
advanced position (for female cleaning).
With the function activated, if the same button is pres-
sed again the oscillating function is activated. If it is
pressed again, we return to the normal mode (not os-
cillating).
While using this function it is possible to adjust:
• Water temperature.
• Water pressure.
• Position of the nozzle to adjust it properly to the user.
To stop this function, press the Stop button on the re-
mote control or on the auxiliary side control.
The cleaning stops after 2 minutes if no other button
is pressed.
If another function is chosen while the cleaning is taking
place, the cleaning stops and the selected function is ac-
tivated.

3.1.3 DRYING FUNCTION

This function provides air for drying after the cleaning
functions.
While using this function it is possible to adjust:
• Air temperature.
To stop this function press the Stop button on the re-
mote control or the auxiliary side control.
The drying stops after 3 minutes if no other button is
pressed.
If another function is chosen while the drying is taking
place, the drying stops and the selected function is ac-
tivated.

3.1.5 FLUSHING

This function allows to make a full flush or a half flush
of the tank.
FULL
❚

3.2 SETTINGS WITH THE REMOTE CONTROL

3.2.1 SETTING OF TEMPERATURE

The water and air functions have a temperature setting.
The water temperature has 4 levels:
• Room temperature (no led is switched on)
• Low temperature aprox. 33ºC (1 led switched on)
• Medium temperature aprox. 36ºC (2 leds switched on)
• High temperature aprox. 39ºC (3 leds switched on)
The air temperature can be adjusted in 4 levels:
• Room temperature
• Low temperature
• Medium temperature (2 leds switched on)
• High temperature
By pressing the plus symbol we can obtain a higher
temperature and by pressing the minus symbol, a lower
temperature.
20
HALF
(no led is switched on)
(1 led switched on)
(3 leds switched on)

3.1.2 ANAL CLEANING FUNCTION

By selecting this function the nozzle is activated in the
rear position.
With the function activated, if the same button is pres-
sed again the oscillating function is activated. If it is
pressed again, we return to the normal mode (not os-
cillating).
While using this function it is possible to adjust:
• Water temperature.
• Water pressure.
• Position of the nozzle to adjust it properly to the user.
To stop this function, press the Stop button on the re-
mote control or on the auxiliary side control.
The cleaning stops after 2 minutes if no other button
is pressed.
If another function is chosen while the cleaning is taking
place, the cleaning stops and the selected function is
activated.

3.1.4 STOP FUNCTION

It stops any active function.

3.2.2 SETTING OF WATER PRESSURE

The cleaning water pressure may be modified obtaining
a higher or lower water force in 3 levels.
By pressing the plus symbol we can obtain a higher
force and by pressing the minus symbol, a lower force.