Roca In-Wash In-Tank A803094001 Mode D'emploi page 16

1. Safety
1.1 Warning - precautions
1.1.1 General warnings
1.1.2 Installation precautions
1.1.3 Precautions for use
1.1.4 Maintenance precautions
1.2 Environmental conditions
2. Introduction
2.1 Product parts
2.2 Start-up
2.2.1 Connection of the remote control and self-calibration
2.2.2 Use of the product
3. Operation
3.1 Functions by remote control
3.1.1 Perineal cleaning function
3.1.2 Anal cleaning function
3.1.3 Drying function
3.1.4 Stop function
3.1.5 Flushing
3.2 Settings with the remote control
3.2.1 Setting of temperature
3.2.2 Setting of water pressure
3.2.3 Setting of position
1. SAFETY
1.1 WARNING - PRECAUTIONS
❚
Please read this manual carefully before using the product, and keep it at hand for future reference.
A negligence or an incorrect use of the product can lead to serious injuries.
The In-Wash + In-Tank is not suitable to be used by individuals (including children) with physical,
sensory or mental disabilities or who lack the experience or knowledge to use it, unless, for their own
safety, they are monitored by a responsible person or they receive instructions on how to use it.
Make sure that children do not play with the device.
When using electric devices, basic safety measures should always be followed; make sure you take
into account the following:
1.1.1 GENERAL WARNINGS
Regarding the packaging:
• The packaging of the In-Wash + In-Tank is not a toy.
• Do not allow children to play with the plastic bags or with the packaging material as they may pre-
sent a risk of suffocation or injuries. Keep therefore the material in a safe place or get rid of it following
the environmental rules.
Regarding the anal and perineal cleaning:
• Do not use the device beyond the time established in each cycle. If you do it, you may be altering
your body´s natural balance.
16
16 3.3 Auxiliary side control
3.3.1 Anal cleaning with auxiliary side control
16
3.3.2 Drying with auxiliary side control
16
3.3.3 Stop with the auxiliary side panel
17
3.3.4 Auxiliary side panel flushing
17
3.4 Change in the pre-set settings
18
3.4.1 Customisation of the cleaning and drying settings
18
3.4.2 Operating modes led lights
18
3.4.3 Silence mode
18
3.5 Return to default settings
19
3.6 Turning off (stand-by) / reset of the product
19
4. Cleaning and maintenance
19
4.1 General cleaning
20
4.2 Cleaning of the nozzle / tip replacement
20
4.3 Descaling of the tip
20
4.4 Cleaning of the filter
20
4.5 Change of batteries in the remote control
20
4.6 Stop due to prolonged absence
20
4.7 Removal of seat and cover
20
5. Troubleshooting
20
6. Technical features
20
20 6.1 Features / specifications
21 7. Disposal of electric and electronic products
21
21
21
21
21
21
21
22
22
22
22
23
23
23
24
24
24
24
25
26
27
27
27