Cup Warmer; Sae Display Version - Astoria SABRINA Manuel D'utilisation Et D'entretien

Cup warmer

7.11
7.11.1 SAE version
Place the cups on the coffee machine cup warmer (1).
To adjust the cup warmer's temperature, proceed as
follows :
Upon the machine switch-on, keep button
the right-hand push-button panel pressed: the flash-
ing led will indicate the current configuration of the
cup warmer according to indications in the following
drawings;
keep button pressed until on the keyboard the
led switches from flashing to a still light;
press the key that corresponds to the desired con-
figuration;
confirm the operation by pressing button
70 °C
158 °F
Cup Heater 80 °C
Disabled 176 °F
The corresponding indicator light on
the front buttons signals the status of
the cup warmer.
For safety reasons it is advisable not to place cloths or other objects
on the cup heater surface to keep the machine from overheating.
USER manual
1
.
90 °C 110 °C
194 °F 230 °F
100 °C
212 °F

7.11.2 SAE DISPLAY version

Place the cups to be heated on the cup heater (1) ;
to activate the cup warmer, press the button
the activation of the cup warmer is signalled on the
display in the following ways.
Cup warmer
on
on
To adjust the temperature of the cup warmer, refer to
the par. 7.12.4 on page 61 .
For safety reasons it is advisable not to place cloths or other objects
on the cup heater surface to keep the machine from overheating..
7.11.3 Display and zeroing of the litres counter
To display the litres counter and for zeroing:
Enter programming until the litres count is displayed;
To perform the zero-
ing press button ( - );
To confirm the zero-
ing press, and keep
pressed, button ( + )
for 3 seconds;
To switch to the next
programming press
button (MODE)
;
Cup warmer on
and heating
LITRES COUNTER
LIT. = NNNNN
ZEROING COUNTS?
PRESS + 3 SEC.
LITRES ZEROED
59 244
of