Dispensing of hot water
7.8
7.8.1 Programming
The machine is programmed by de-
fault. Should the hot water doses have
to be modified, proceed as follows:
Place the jug under the hot water
nozzle;
press button
button on
the right control panel for 5
seconds: the LED of the same
button begins to flash;
press the hot water button
to confirm the dose, press again
button
;
on concluding the program-
ming, press button
USER manual
;
.
7.8.2 Dispensing hot water
Place the jug under the hot water
nozzle;
press water button
wait for the dispensing of hot
water;
to block the dispensing in advance,
press the hot water dispensing but-
ton
or press button
Avoid contact with the hot water nozzle, do not direct your hands
or other body parts towards the hot water nozzle ends.
and
.
57
244
of