Dispensing Hot Water; Compact Version; Aep Version; Sae Version - Astoria Core200 AEP Mode D'emploi

Core200

6.9 Dispensing hot water

Danger of scalding. Do not direct hot water towards hands or other parts of the body. Do not touch the hot water
nozzle with bare hands; use the appropriate PPE.
6.9.1

COMPACT version

• Place the jug under the hot
water nozzle (4).
• Rotate the valve knob (15)
anticlockwise.
• The hot water flow will be
proportional to how open the
valve is.
• To stop dispensing, turn the
valve knob clockwise.

AEP version

6.9.2
• Place the jug under the hot water nozzle (4).
• Press the water button (2).
• To stop dispensing water ahead of time, press the same
button (2).
0
1 2
40 160
of
4
4
4
2
6.9.3

SAE version

• Place the jug under the hot water nozzle.
15
• Press the water button
panel (13) and wait for the hot water to be dispensed.
• To stop the dispensing cycle ahead of time, press the hot
water dispensing button
15
0
1 2
Programming the hot water
6.9.4
(SAE version)
• Place the jug under the hot water
nozzle.
• Press the
seconds until it begins to flash.
on the service pushbutton
again.
13
button for at least 5
User manual