To Set The Time Of Day; To Set The Timer - Fulgor Milano Sofia Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once power returns to the oven, the
clock displays the time 12:00
The clock time will appear during all oven operations except when there is the timer or any timed cooking
operations running.
The oven is preset to a 12-hour clock and indicates

To Set the Time of Day

1.
Touch [TIME] until the display shows the "SET
TIME" writing.
2.
Touch [INC] or [DEC] to set the desired time, the
hours will begin flashing: continue until the correct
AM
hour value and
or
3.
Touch [TIME] again to confirm the hour and minutes
will start flashing.
4.
Touch [INC] or [DEC] to set the desired minutes
value or hold the key to change by 10 minute steps.
5.
Touch [TIME] again or wait for 5 seconds in order to
confirm the time.
NOTE: The Time of Day can never be set if any time
function is already set: first delete all the active time
functions.
Setting the Clock and Timer
AM
.
PM
indication is selected.
AM
PM
and
.

To Set the Timer

1.
Touch [TIME] until the display shows the
"TIMER" writing.
2.
Touch [INC] or [DEC] to set the desired timer
value, the hours will begin flashing: continue until
the desired value is set.
3.
Touch [TIME] again to confirm the hour and
minutes will start flashing.
4.
Touch [INC] or [DEC] to set the desired minutes
value or hold the key to change by 10 minute
steps.
5.
Touch [TIME] again or wait for 5 seconds in order
to confirm the time.
6.
"TIMER" will be steadily displayed.
7.
When the time ends, reminder beeps will sound
for 15 minutes or until the [TIME] key is pressed.
8.
Timer format is usually HR:MIN, switching into
MIN:SEC during the last minute.
9.
The displayed value is always rounded to the
lower minute.
Use & Care Manual
ENGLISH
13

Publicité

Table des Matières
loading

Table des Matières