Before using your oven for the first time remove all
packing and foreign materials from the oven(s). Any
material of this sort left inside may melt or burn when
the appliance is used.
Flashing Symbols or Numbers
Signals an incomplete action that is in progress (locking
the door, preheat, etc.) or an incomplete setting that
calls for another input.
Beeps
Signals that more information must be entered or
confirms the receipt of an entry. Beeps also signal the
end of a function or an oven fault.
'RRU ORFN
It's displayed steadily when the door is locked. The
symbol flashes when the latch is moving in order to lock
or unlock the door. Do not attempt to open the door at
this time. Door can be opened when the symbol no
longer appears. "AUTO LOCK" appears when the door
has been locked automatically due to self-clean mode.
"USER LOCK" is displayed when the door has been
locked manually by the user, for example to prevent
children from having free access to the oven cavity.
Hold both the [INC] and [DEC] keys for 3 seconds. The
latch will lock the door. Repeat the same operation to
unlock.
Locking the keyboard
Hold both the keys indicated by "KEYBD. LOCK" legend
for 3 seconds. Commands are now locked and "SENS
LOCK" will be displayed every time you touch any keys.
Repeat the same operation for 3 seconds to unlock the
keyboard.
Power Failure
After the power returns to the oven, the clock displays
AM
the time 12.00
.
Default Settings
The cooking modes automatically select a suitable
temperature when the selector is in the preset position.
These can be changed when a different one is needed.
It's also possible to set a user option in order to save the
last used temperature per every cooking mode.
F Failure Number Codes
These codes are displayed when the electronic control
detects a problem in the oven or in the electronics.
10
General Oven Information
Convection Fan
The convection fan operates during any convection
mode. When the oven is operating in the convection
mode, the fan will turn off automatically when the door
is opened. The convection fan always runs during the
preheat time.
Preheat and Fast Preheat
Whenever a cooking mode is set and the oven is
heating, the "PREHEAT" writing appears in the
temperature display: the vertical bar indicates, in four
steps, when the oven reaches the 25%, 50%, 75%,
100% of the set-point temperature.
As soon as the 100% is reached, the control sounds
an "end of preheat" tone and the "PREHEAT" writing
disappears.
When it's necessary to heat up the oven rapidly, a
Fast Preheat mode is available: it uses the heating
elements and the convection fan in a special way, in
order to reduce the heating time as long as possible.
After having set one of the cooking functions for which
the fast preheat is available, touch the [FAST
PREHEAT] key, the "FAST" writing is shown in
addition to the "PREHEAT" one.
As soon as the set-point temperature is reached, the
control sounds an "end of preheat" tone and both
"FAST" and "PREHEAT" writings disappear. The oven
switches automatically to the desired cooking mode
that was previously set: put the food inside now.
Use & Care Manual
ENGLISH