Activating The Sleep Function - Dometic FRESHJET FJ1700 Notice D'utilisation

Operating the roof air conditioner
➤ Press the SET button to transmit the value to the roof air conditioner.
✓ The switch-off time is set on the roof air conditioner.
The roof air conditioner runs in the selected air conditioning mode until the
specified time.
Setting the switch-on and switch-off times
➤ Press the
button three times.
✓ The ON symbol (
The OFF symbol (
➤ Use the + or – button to set the time when the roof air conditioner is to switch on.
➤ Press the
button again.
✓ The OFF symbol (
➤ Use the + or – button to set the time when the roof air conditioner is to switch off.
➤ Press the SET button to transmit the value to the roof air conditioner.
✓ The switch-on and switch-off times are set on the roof air conditioner.
The roof air conditioner starts in the selected air conditioning mode at the speci-
fied time and runs until the second specified time.
➤ Switch the roof air conditioner to stand-by.
Cancelling timer settings
If you have set the timer, you can cancel these settings as follows:
➤ Press the
button four times.
✓ The timer symbol disappears.
✓ The setting has been cancelled.
9.10

Activating the sleep function

I
NOTE
The sleep function is deactivated in "Circulating air" (
When the sleep function is activated, the set temperature is modified by 1 °C after
one hour and by 2 °C after two hours to ensure a pleasant temperature for sleeping.
➤ Set the required temperature (see chapter "Setting the temperature" on
page 30).
32
) flashes on the display of the remote control.
) is displayed.
) flashes on the display of the remote control.
FreshJet
) mode.
EN