Parameter
Description
Un
Temperature units
d1
Massage duration time
d2
Massage inhibition time
rn
d3
Refill duration time
5.6. Optional functions
The features explained in this manual correspond to standard configuration. These
optional functions can be configured from a hidden menu. If you are interested please
contact your dealer.
• Insert coin option (or light control via external button)
• External heat exchanger
6. MAINTENANCE
6.1. Maintenance warnings
• Before proceeding to carry out any electrical or mechanical intervention, please ensure
the machine is disconnected from the power supply network and that the start up devices
are blocked.
• Do not handle the equipment withwet feet.
6.2. Acrylic maintenance
Easy care for an elegant surface:
• Use common cleaners for general use. For normal care and cleaning, use a soft cloth
or sponge with a little soap and water. Rinse it well, and dry with a clean, dry cloth. If you
are using a household cleaner, please ensure it is recommended for acrylic surfaces by
the manufacturer.
• Never use abrasive cleaners.
• Do not allow the acrylic surface to come into contact with ketones or esters such as
acetone, acetates (such as nail varnish remover, nail varnish or dry cleaning substances)
or any organic solvent with chlorine, varnishes, petrol, aromatic solvents, etc.
• Remove dust, smears and dry dirt with a soft, moist cloth.
• Clean off grease, oil, paint and ink stains with isopropyl alcohol and dry it with a clean,
dry cloth.
• Avoid using razors or any other kind of sharp instrument that could scratch the surface.
Small scratches can be removed by applying a fine layer of automotive varnish and lightly
polishing it with a clean cloth.
General Parameter Configuration
Interval
ºC - ºF
00-99 (minutes)
00-99 (seconds)
Nr refill
0 – 2 (s)
00 – 99 (m)
Default value
Involved
Function
ºC
Temperature
10 minutes
Water/Air massage
00 seconds
Water/Air massage
0
0
ENG
EV load
EV load
29