Tool Specifications; Operating Controls - Festool HK 132 E Notice D'utilisation D'origine

Hand Circular Saw HK 132 E
GB
Original instruction
Table of contents
1 Symbols ...........................................................17
2 Tool Specifications ...........................................17
3 Operating Controls ..........................................17
4 Intended Use ...................................................18
5 Safety instructions ...........................................18
6 Commissioning and Operation .......................20
7 Adjustment ......................................................20
8 Operating Instructions ....................................22
9 Using Attachments ..........................................22
10 Maintenance ...................................................23
11 Environment ....................................................23
1 Symbols
Warning of general danger
Risk of electric shock
Read the operating instructions/notes!
Wear a dust mask!
Wear ear protection!
Wear protective gloves!
Do not throw in the household waste!
Protection class II
2

Tool Specifications

Nominal voltage
Mains frequency
Power consumption
Rated rmp (no load)
Constant-Electronic
Smooth start
Overload protection
Temperature fuse
Saw blade ø
Hole
Tooth width
Blade thickness
Cutting depth 60°
Cutting angle
Weight according to
EPTA-Procedure 01:2014
3
[1-1] Sawdust ejector
[1-2] Lever for pendulum guard
[1-3] Additional handhold
[1-4] Additional handhold for 2-man operation
[1-5] Parallel guide for guide rail
[1-6] Locking screw for parallel guide
[1-7] Cutting angle locking lever
[1-8] Cutting edge indicator
[1-9] Pendulum guard
[1-10] Clamping screw
[1-11] Riving knife
[1-12] Riving knife screw
[1-13] On/Off switch
[1-14] Lock-off switch
[1-15] Cutting depth scale
[1-16] Cutting depth locking lever
[1-17] Additional handhold for 2-man operation
[1-18] Cutting angle locking lever
[1-19] Cutting angle scale
[2-1] Winged screw for parallel guide
[2-2] Base plate
[2-3] Parallel guide (right hand fitting)
[2-4] Parallel guide for guide rail
[3-1] Clamping screw
[3-2] Clamping flange
[3-3] Saw blade
[3-4] Mounting flange
[3-5] Lever for swinging guard
[4-1] Additional handhold
[4-2] Additional handhold
220 -240 V ~
[5-1] Blade guard cover plate
50-60 Hz
[5-2] Pendulum guard cover plate
2300 W
[5-3] Dust extraction connection
2200 min
-1
[5-4] Riving knife
•
[6-1] Mounting flange
•
[6-2] Clamping flange
•
[6-3] Planing head
•
[6-4] Retaining pin
350 mm
[6-5] Pendulum mount cover guard
30 mm
[6-6] Pendulum mount
3.5 mm
[6-7] Blade guard cover
2.5 mm
[6-8] Blade guard
17
45°

Operating Controls

0 ... 60 mm
0 ... 90 mm
0° ... 60°
16 kg