Working With The Electric Power Tool - Festool HK 55 EQ Guide D'utilisation

1
2
Please observe all mentioned safety infor-
mations and the following rules when work-
ing:
– Only guide the machine against the workpiece
when it is switched on.
– Check the function of the pendulum guard prior
to use and do not use the electric power tool if it
does not slide in and out easily.
– Always secure the workpiece in such a manner
that it cannot move while being processed.
– Always hold the machine with two hands at the
handles [1-1] when performing work. This re-
duces the risk of injury and is a prerequisite for
precise work.
16
6
6-1
6-2
6-3

Working with the electric power tool

– Always push the saw forwards [8-9], and never
towards yourself.
– Adapt the infeed speed to prevent the cutters on
the saw blade from overheating and prevent
plastic materials from melting during cutting.
– Make sure that the knob [1-12] is tightened be-
fore starting work.
Sawing along the scribe mark
The cut indicators display the cutting sequence
without a guide rail:
0° cuts: [7-1]
45° cuts: [7-2]