Device Description; Main Switch - Leister GEOSTAR G5 Instructions D'utilisation

Device description

14
21
1. Power supply cord

2. Main switch

3. Operating unit
4. Clamping arm
5. Welding wedge
6. Towing bar
7. Clamping lever
8. Welding force adjustment ring
9. Welding force safety bolt
10. Clamping lever lock
11. Handle
12. Track roller, rear
13. Welding wedge plug
Main switch (2)
For switching the GEOSTAR wedge welder on/off
Operating unit (3)
«e-Drive»
The «e-Drive» is used as the navigator.
It has two functions:
36
15 17
15
20
19
13
10
16
9
8
22
12
14. Contacting system, upper
15. Contacting system, lower
16. Upper drive/pressure roller
17. Lower drive/pressure roller
18. Track roller, front
19. Setting screw, contacting system, lower
20. Locking screw, contacting system, lower
21. Welding wedge locking screw
22. Swivel head
Rotate to the left or right in order to set
various menus or values.
Press to confirm or to
activate.
7
3
4
5
6
11
2
18
1