Leister GEOSTAR G5 Instructions D'utilisation page 38

Status LED display "Heating"
The LED on the Heating "On/Off" key (29) displays the conditions of the heating.
LED status (31)
Heating On/Off (29)
LED off
LED flashes green
LED continuously green
If, during operation, a warning message occurs in the Status display area 2 (36) or if there is an error message
in the working display (34), then this will be displayed as followed:
LED flashes red
LED continuously red
Status LED display "Drive"
The LED of the Drive "On/Off" key (30) shows the condition of the drive when it is working as intended.
LED status (31)
Drive On/Off (30)
LED off
LED continuously green
If, during operation of the drive, a warning message occurs in the Status display area 2 (36) or if there is an
error message in the working display (34), then this will be displayed as follows:
LED flashes red
LED continuously red
Operating unit description
Keyboard mode
38
Condition
Heating is switched off.
Heating is switched on. Temperature
is outside the tolerance range.
Heating is switched on. Temperature
is within the tolerance range.
Warning message for the heating
Error message for the heating
Condition
Drive is switched off.
Drive is switched on.
Drive current limiting is active.
The drive has an error.
Current selection
Working display
Changes the position
Up (27)
within the working
Down (28)
display.
Heating
Switched heating
On/Off (29)
on/off
Drive
Switches drive
On/Off (30)
on/off
Cause
See warning and error message.
See warning and error message.
Cause
See warning and error message.
See warning and error message.
Current selection
function display
Switches from
function display to
working display.
Switched heating
on/off
Switches drive
on/off
Current selection
Set-up menu
Changes the position
within the Setup menu.
No function
No function