Leister GEOSTAR G5 Instructions D'utilisation page 43

Working display overview
Machine Setup
Select Unit:
Adjusting the unit used
(metric/imperial)
LCD Contrast:
Adjusting the LCD contrast
LCD Backlight:
Adjusting the background
illumination of the display
Key Backlight:
Adjusting the background
illumination of the key-
board
Application Mode
If "Application Mode"
is activated, then more
detailed information on the
drive and heating capacity
utilization appears in the
working display (34).
Show Set Values
If "Show Set Values" is ac-
tivated, both the actual val-
ues and the set values are
displayed in small font size.
Factory setting activated.
Reset to defaults
If the "Reset to defaults"
menu is selected and
confi rmed by selecting the
relevant function, all cus-
tomer-specifi c profi les will
be deleted. Settings that
have been changed via the
Setup menu will be reset to
the factory settings.
43