Measure Installation; Prepare The Installation - Broan Best WP29M Serie Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. MEASURE INSTALLATION

Dimensions for the most common installation are shown beside.
The minimum hood distance above cooktop must not be
less than 24''. A maximum of 30" above cooktop is highly
recommended for best capture of cooking impurities.
Distances over 30" are at the installer and users discretion.

3. PREPARE THE INSTALLATION

When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and
gloves.
Remove the installation kit from inside the hood.
Make sure that the following items are included:
- Wood strip (screwed on back of hood)
- Installation manual
- Accessories including:
• Evolutionary™ hybrid baffle filters (3 for hoods up to 54" width, 4 for 60" width)
• Shielded halogen lights (GU10 type base, 120 V, 50 W) (4 for hoods up to 42" width, 6 for hoods from 48" to 60" width)
• Bag of parts including:
(4) flat head screws #10-2'', (8) screws #8 x 3/4'', (4) nuts #10-32, (2) wall anchors, (2) washers 3/16'' ID x 3/4'' OD
Parts sold separately:
- Interior blower Model P6 (includes rough-in kit), for either ducted or non-ducted installation.
- Interior blower Model P12 (includes rough-in kit), for ducted installation only.
- In-line blower assembly ILB3, ILB6, ILB9 or ILB11 (all include transition and rough-in plate), for ducted installation only.
- Exterior blower assembly EB6, EB9, EB12 or EB15 (all include rough-in plate), for ducted installation only.
- Transitions, duct, elbows, dampers, wall and roof caps. Refer to pages 3 and 4 for a complete list of venting options and model
numbers.
- Non-duct kit ANKWPD Series, mandatory for non-ducted installation.
- Optional decorative flue AEWP Series, for ducted installation only.
- Optional flat top cover ADPWP Series, for ducting through back of hood, intalled on hood or installed on the optional decorative
flue AEWP Series. Can also be installed on the non-duct kit flue ANKWPD Series.
Cabinet, soffit,
decorative flue or
non-duct kit flue
HH0072A
MINIMUM AND MAXIMUM DISTANCE
CAUTION
- 6 -
Top of wood
A
mounting strip
A + 0.25'' (6 mm)
Hood
Minimum distance between
the hood and cooktop:
24'' (610 mm)
Recommended maximum
distance between the hood
and cooktop: 30'' (762 mm)
Standard 36" (914 mm)
high cooktop
OVER COOKTOP
Ceiling

Publicité

Table des Matières
loading

Table des Matières