Bissell PETHAIR ERASER 1650 Serie Mode D'emploi page 15

Masquer les pouces Voir aussi pour PETHAIR ERASER 1650 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Replace the Brush & Belt
1
Unplug vacuum, turn over and
unscrew 9 Silver Phillips head
screws to remove bottom
cover.
4
1. Place belt back on brush roll.
2. Pinch belt around brush roll & hook
back around the silver motor gear.
NOTE: If an object becomes lodged in foot and brush shuts off, turn vacuum
off and unplug from electrical outlet. Remove obstruction and brush will
automatically reset when vacuum is plugged and turned back on.
Parts & Supplies
For Parts and Supplies, go to www.BISSELL.com and enter
your model number in the search field.
2
Pull roller straight out
and slide belt off motor
gear. Replace roller and/
or belt.
3. Rotate brush roll into place and line up
end caps.
4. Re-attach bottom cover with 9 screws.
3
1. Inspect brush roll by
placing it on its end and
spin. The brush roll should
spin freely, multiple times
by one flick. If it doesn't,
replace brush roll.
2. Inspect belt, replace if it
appears damaged.
www.BISSELL.com
15

Publicité

Table des Matières
loading

Table des Matières