Above Floor Cleaning - Bissell PETHAIR ERASER 1650 Serie Mode D'emploi

Brush roll Safety Feature
1
If red light
illuminates
around height
adjustment
knob, you
have tripped
your brush roll
motor safety
feature.
It may have
3
tripped because
of use on premium
soft carpet. Turn
Height Adjustment
Knob to the "high
carpet" setting.
Also check if
debris is clogged
in brush roll. Clear
debris if necessary.

Above Floor Cleaning:

1
To use tools and the hose/wand;
turn the green knob aligning
arrow with "hose/tool suction."
2-in-1 Pet Brush has
white soft bristles
for those gentle uses
and rubber knobs for
embedded pet hair.
2
Press Handle Release
Button to release handle
from wand.
3
Use the collar with the
white soft bristles side for
delicate surfaces.
2
Power
On/O
Switch
Put vacuum in upright position and turn it off.
4
Power
On/O
Switch
Turn vacuum back on and try again.
Handle
4
Un-click the collar and flip around to
use the rubber fingers for removing pet
hair from your furniture. Listen for 2
"clicks" when reattaching.
Once done using Handle, slide back on
to Wand until it "clicks."
Be sure to turn the green knob back to
"Floor Suction" mode after using tools.
Pull straight up
and out.
www.BISSELL.com
9