Parts & Supplies - Bissell PETHAIR ERASER 1650 Serie Mode D'emploi

Removing/Emptying Dirt Tank
WARNING
To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
Vacuum tank is full. Time to empty!
3
Holding Dirt Container
over a trash bin, press
Tank Empty Button.
Snap bottom back
into place.
WARNING
Do not operate vacuum with damp or wet filters. Allow components to dry before
reassembling the Dirt Container.
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without
these filters.
Parts & Supplies
For Parts and Supplies, go to www.BISSELL.com and enter
your model number in the search field.
12
www.BISSELL.com
2
Press Tank Release
Button. Grab handle
to pull Dirt Container
away from vacuum.
4
Place tank back
on the vacuum.
Be sure you
place the front
of the tank first
and push back to
"click" into place.