Technical Data; Control Panel; Functions - BRIGHT 018208 Mode D'emploi

EN
• Do not cover ventilation openings.
• A damaged cord or plug must be replaced
by an authorised service centre or
qualified person to ensure safe use.
• Place the power cord so that it is not
clinched, or clenched.
• Never modify the controls in any way.
• Only use new hoses to connect the water.
Never reuse old hoses.
WARNING!
• Keep the packaging material out of the
reach of children – risk of suffocation.
SYMBOLS
Description of symbols used on the product. Familiarise yourself
with them to reduce the risk of personal injury and material
damage.
Safety class II, extra or double insulation.
Approved according to relevant EU directives.
Sort at source as electrical waste.
48

TECHNICAL DATA

Rated voltage
Rated output
Power consumption when switched off
Power consumption in standby mode
Water pressure
Water consumption
Capacity
Number of wash programmes
Largest plate diameter
Hose, cold water
Hose, drain
Height
Width
Depth
Net weight
DESCRIPTION

CONTROL PANEL

1. Delay button: Press to set delay
2. Power switch: Switch power supply on/off
3. Status lamp for rinse-aid: Goes on for low rinse-aid level.
Add rinse-aid.
4. Status lamp for salt: Goes on for low salt level.
Add softener salt.
5. Status lamp for water fault. Check that the tap is open.
6. Indication of set delay.
7. Programme selector: Press the button to select required
programme.
8. Start/stop button: Start/stop dishwashing.
9. Programme indicator.
FIG. 1

FUNCTIONS

1. Cup shelf
2. Basket
3. Container for softener salt
4. Dishwasher detergent compartment
5. Cutlery basket
6. Filter unit
7. Rinse-aid container
8. Rinse arm
9. Container for softener salt
10. Dishwasher detergent compartment
FIG. 2
230 V ~ 50 Hz
1280 W
0.45 W
0.49 W
0.4-10 bar
6.5 l
6 canteens
6
25 cm
1500 mm
1500 mm
438 mm
550 mm
550 mm
21.5 kg