Servicing; Cleaning; Service Intervals - Parker 20H-MD Guide D'utilisation

5 Servicing

The recommended service procedures identified below, along with all other repair and calibration work, should be undertaken by a Parker
Hannifin approved engineer.

5.1 Cleaning

Clean the equipment with a damp cloth only and avoid excessive moisture around any electrical sockets. If required you may use a mild
detergent, however do not use abrasives or solvents as they may damage the warning labels on the equipment.

5.1.1 Service Intervals

Component
Generator Check the power ON indicator is illuminated.
Generator Check the STATUS / FAULT Indicator on the control panel.
Generator Check the water level.
Generator Check the water conductivity.
Generator Check the water bottle spillage drains
Generator Check for leaks.
Recommended Service A
Generator
6 Month Service.
Generator Condition the dryer columns (ref "Dryer Status" on page 12).
Recommended Service B
Generator
24 Month Service.
Service
A
B
Key:
Check
16
Operation
Recommended Process
Essential Procedure