Frost Protection; Transport - Kärcher HD 1.8/13 C Ed Mode D'emploi

Frost protection

Warning
Frost will destroy the not completely
water drained device.
Store the appliance in a frost free area.
If you cannot store it in a frost-free
place:
Drain water.

Pump in conventional frost protec-

tion agents through the appliance.
NOTICE
Use normal glycol-based anti-freezing
agents for automobiles.
Observe handling instructions of the
anti-freeze agent manufacturer.
Operate device for max. 1 minute

until the pump and conduits are
empty.

Transport

CAUTION
Risk of injury and damage! Observe
the weight of the appliance when you
transport it.
ATTENTION
Protect the trigger from damage during
transport.
In order to transport the appliance

over longer distances, pull it behind
you holding on to the push handle.
In order to carry the appliance, hold

on to the handles.
In order to climb stairs, pull the ap-

pliance up step by step. The skids
protect the casing from damage.
When transporting in vehicles, se-

cure the appliance according to the
guidelines from slipping and tipping
over.
12
Transport bracket for surface
Attach the connecting piece of the

surface cleaner to the bolt at the
high-pressure cleaner.
Screw on the union nut by approx. 1

rotation.
Transport by crane
Attach the lifting device to the carry-

ing handle of the appliance.
Safety information about cranes
DANGER
Risk of injury due to machine dropping.
Adhere to the local accident pre-
–
vention guidelines and safety
notes.
Check the carrying handle for dam-
–
age prior to every transportation by
crane.
Check the lifting unit for damage
–
prior to each transport by crane.
Only lift the appliance using the car-
–
rying handle.
Do not use stop chains.
–
Protect the lifting device from inad-
–
vertent load release.
Remove spray lance with hand
–
spray gun, nozzles, surface cleaner
and other loose objects prior to
transportation by crane.
– 9
EN
cleaner