Storage; Care And Maintenance; Troubleshooting - Kärcher HD 1.8/13 C Ed Mode D'emploi

Do not transport any articles on the
–
appliance during the lifting process.
The appliance must only be trans-
–
ported by properly trained crane
personnel.
Do not stand below the load.
–
Ensure that no persons are present
–
in the immediate vicinity of the
crane.
Do not leave the appliance on the
–
crane unattended.

Storage

CAUTION
Risk of injury and damage! Note the
weight of the appliance in case of stor-
age.
This appliance must only be stored in
interior rooms.

Care and maintenance

DANGER
Risk of injury by inadvertent startup of
appliance and electrical shock.
First pull out the plug from the mains
before carrying out any tasks on the
machine.
Safety inspection/ maintenance
contract
You can sign with your dealer a con-
tract for regular safety inspection or
even sign a maintenance contract.
Please take advice on this matter.
Before each use
Check connection cable for damag-

es (risk of electrical shock); get the
damaged connection cable re-
placed immediately by an autho-
rised customer service person/
electrician.
Check the high pressure hose for

damages (risk of bursting).
Please arrange for the immediate
exchange of a damaged high-pres-
sure hose.
Check appliance (pump) for leaks.

3 drops per minute are permitted
and can come out from the lower
side of the appliance. Call Custom-
er Service if there is heavy leakage.
Clean the sieve in the water con-

nection.
Clean filter at the detergent suck

hose.
Every 500 operating hours, at
least annually
Have the maintenance of the de-

vice performed by the customer
service.
Clean the sieve in the water con-
Unscrew the covering nut.

Pull out the hose nipple with the

sieve.
Clean the sieve from the outside

and rinse it.
Note:
Align the hexagon of the hose nipple in
the appliance for connection.
Insert the hose nipple with the sieve

and tighten the union nut.

Troubleshooting

DANGER
Risk of injury by inadvertent startup
–
of appliance and electrical shock.
First pull out the plug from the
–
mains before carrying out any tasks
on the machine.
Get the electrical components
–
checked and repaired only by au-
thorised customer service persons.
– 10
EN
Weekly
nection
13