FS INTEL XEON RS7260-V2 Guide De Démarrage Rapide page 28

NOTE: 1. Disabling the VMD controller without first deleting the associated existing RAID volume
can lead to unexpected behavior. This action is strongly not recommended.
2. The effects of physically changing or swapping a CPU on the VMD controller enablement has
not yet been thoroughly tested or documented.
7. Switch to Advanced > Intel(R) Virtual RAID on CPU > All Intel VMD Controllers > Create RAID
Volume.
8. Set Name.
9. Set RAID Level.
Advanced
Create RAID Volume
Name:
RATD Level:
Enable RAID spanned over VMD Controller
Select Disks:
INTEL SSDPE2KX040T7 SN: PHLF725400PQ4P0I
INTEL SSDPE2KX040T7 SN: PHLF720500SB4P0I
INTEL SSDPE2KX040T7 SN: PHLF725400KP4P0I
INTEL SSDPE2KX040T7 SN: BTLF727107JV4P0I
Strip Size:
Capacity (GB):
Create Volume
Advanced
Create RAID Volume
Name:
RATD Level:
Enable RAID spanned over VMD Controller
Select Disks:
INTEL SSDPE2KX040T7 SN: PHLF725400PQ4P0I
INTEL SSDPE2KX040T7 SN: PHLF720500SB4P0I
INTEL SSDPE2KX040T7 SN: PHLF725400KP4P0I
INTEL SSDPE2KX040T7 SN: BTLF727107JV4P0I
Strip Size:
Capacity (GB):
Create Volume
Aptio Setup Utility-Copyright (C) 2018 American Megatrends, Inc.
Volume()
[RAID0(Stripe)]
[ ]
[x]
[x]
[ ]
[ ]
[128KB]
7079.43
Version 2.19.1268 Copyright (C) 2018 American Megatrends, Inc.
Aptio Setup Utility-Copyright (C) 2018 American Megatrends, Inc.
Volume()
[RAID0(Stripe)]
[x]
[x]
[x]
[x]
[x]
[128KB]
14158.88
Version 2.19.1268 Copyright (C) 2018 American Megatrends, Inc.
x - to Select Disk
→←：Select Screen
↑↓：Select Item
Enter: Select
+/-: Charge Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
x - to Select Disk
→←：Select Screen
↑↓：Select Item
Enter: Select
+/-: Charge Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
27