FS INTEL XEON RS7260-V2 Guide De Démarrage Rapide page 20

2. Align the key of the DIMM with the receptive point on the memory slot and with your thumbs on
both ends of the module, press it straight down into the slot until the module snaps into place.
3. Press the release tabs to the locked position to secure the DIMM module into the slot.
NOTE: Exercise extreme caution when installing or removing memory modules to prevent
damage to the DIMMs or slots.
Installing Drives
UID
Removing a Hot-Swap Drive Carrier from the Chassis
1. Press the release button on the drive carrier, which will extend the drive carrier handle.
2. Use the drive carrier handle to pull the drive out of the chassis.
Key
2
1
19