FS INTEL XEON RS7260-V2 Guide De Démarrage Rapide page 18

5. Align nut A (next to the triangles and pin 1) on the heatsink with threaded fastener "a" on the CPU
socket. Also align nuts B, C, D on the heatsink with threaded fasteners b, c, d on the CPU socket.
6. Gently place the heatsink on the CPU socket, making sure that each nut is properly aligned with its
corresponding threaded fastener.
Rotating Wire
7. Press all four rotating wires outward to latch the PHM onto the CPU socket.
A, B, C, D: Peek Nut on the Heatsink
D
b
d
a, b, c, d:
Threaded Fastener on the CPU socket
Rotating Wire
B
C
A
c
a
Latched State
Top View
17