FS INTEL XEON RS7260-V2 Guide De Démarrage Rapide page 10

1. Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
2. Press the locking tab down to release the inner rail.
3. Pull the inner rail all the way out.
Installing the Inner Rails
1. Identify the left and right inner rails. They are labeled.
2. Place the inner rail firmly against the side of the chassis, aligning the hooks on the side of the
chassis with the holes in the inner rail.
3. Slide the inner rail forward toward the front of the chassis until the quick release bracket snaps into
place, securing the rail to the chassis.
4. Optionally, you can further secure the inner rail to the chassis with screws.
4
Inner Rails
2
4
3
9