FS INTEL XEON RS7260-V2 Guide De Démarrage Rapide page 25

Installing the OS
1. Create a method to access the MS Windows installation ISO file. That might be a DVD, perhaps
using an external USB/SATA DVD drive, or a USB flash drive, or the IPMI KVM console.
2. Retrieve the proper RST/RSTe driver. Go to the web page for your motherboard and click on
"Download the Latest Drivers and Utilities", select the proper driver, and copy it to a USB flash drive.
3. Boot from a bootable device with Windows OS installation. You can see a bootable device list by
pressing F11 during the system startup.
Please select boot device:
ATEN Virtual CDROM YS0J
ASUS SDRW-08D2S-U F601
USB FLASH DRIVE PMAP
IBA 40-10G Slot 1900 v1060
UEFI: ATEN Virtual CDROM YS0J
UEFI: ASUS SDRW-08D2S-U F601
UEFI: Built-in EFI Shell
Enter Setup
↑ and ↓ to move selection
ENTER to select boot device
ESC to boot using defaults
4. During Windows Setup, continue to the dialog where you select the drives on which to install
Windows. If the disk you want to use is not listed, click on "Load driver" link at the bottom left corner.
Windows Setup
Where do you want to install Windows ?
Name
Refresh Delete
Load driver Extend
We couldn't find any drives . To get a storage driver , click Load driver .
IPMI virtual drive (Legacy)
USB DVD device (Legacy)
USB flash drive with OS installation (Legacy)
PXE boot (Legacy)
IPMI virtual drive (UEFI)
USB DVD device (UEFI)
Total size Free space Type
Format New
Next
24