FS INTEL XEON RS7260-V2 Guide De Démarrage Rapide page 19

B
D
C
A
8. With a t30-bit screwdriver, tighten all PEEK nuts in the sequence of A, B, C, and D with even pressure
not greater than 12 lbf-in.
Installing Memory
ESD Precautions
Electrostatic Discharge (ESD) can damage electronic components including memory modules. To
avoid damaging DIMM modules, it is important to handle them carefully. The following measures are
generally sufficient.
• Use a grounded wrist strap designed to prevent static discharge.
• Handle the memory module by its edges only.
• Put the memory modules into the antistatic bags when not in use.
Installing Memory
Notches
Release Tabs
1. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
18