FS INTEL XEON RS7260-V2 Guide De Démarrage Rapide page 23

Internal Expansion Card
Expansion Cards
1. Power down the system and remove the top chassis cover.
2. Remove the bracket and sections of the chassis in the rear.
3. If necessary, attach the riser card to the riser card bracket using screws.
4. Insert the expansion card into a slot on the riser card while aligning the expansion card backplate
with the open slot in the rear of the chassis.
5. Insert the riser card into the motherboard expansion slot while aligning the riser card bracket with
the rear of the chassis.
6. If necessary, connect the GPU power cables to one of the 8-pin power connectors on the
motherboard.
Installing the Low Profile Center Expansion Card
Riser Card Slot
22