Establishing Communication Via The Best Software - Bitzer CM-RC-01 Instructions De Montage

▶ Use the enclosed spacer washers, screws and nuts
(see small figure) to fasten the fan feet of the pre-
assembled fan.
Then lay the cables and close the cable ties (see
chapter Laying the cables, page 21).
5 Establishing communication via the BEST
SOFTWARE
• PC/mobile device
– with the Windows 7 or newer operating system
– with Bluetooth interface or USB connection
– with installed BEST SOFTWARE
• For communication via the USB port:
– Connect the BEST interface converter to the com-
pressor module (CN14) and to the PC or mobile
device.
28
Setting up communication
▶ Switch on PC/mobile device and start the BEST
SOFTWARE (1).
▶ Click on the N button (2).
EW
▶ Select IQ MODULE CM-RC-01 (3).
Fig. 1: Connecting CM-RC-01 to BEST SOFTWARE
▶ Click on the C
ONNECT
➙ The following appears for selection: BEST
or B .
LUETOOTH
▶ SelectionBEST
CONVERTER
Click on the C
ONNECT
➙ The compressor module is now connected to the PC
or mobile device.
▶ Select U F
PDATE IRMWARE
figure 2, page 29).
▶ Search folder (...\BEST\Firmware\CM-RC-01) for
new firmware.
▶ Start firmware update and wait until the successful
update is confirmed. Confirm with OK (3).
button (4).
CONVERTER
:
button.
(1) and B ... (2) (see
ROWSE
KW-231-2