Auto Data Record - RS Pro RS-5322 Manuel D'instructions

PM2.5 AIR QUALITY MONITOR / EN

6-10 Auto data record

1. Record data without preset start time
a). Press
b). Press S key for 3 seconds to enter the setting mode, the "SET" and
"DATE" marks are displayed.
c). Press S key 7 times to enter the auto data record interval time
selecting mode, the "int- A M min sec" mark is displayed.
d). Press
5 sec → 10 sec → 30 sec→ 1 min → 2 min → 3 min → 4 min
→ 5 min → 10 min → 15 min → 20 min → 30 min → 60 min
e). Press ↵ key to store the interval time and exit.
f). Press MEM key for 3 seconds to enter the auto data record mode,
the "A" mark is displayed, when the "M" mark is disappeared one
time, one set of reading is stored to the memory.
g). When the memory is filled (micro SD CARD 4GB or 99 blocks is full
used), the "SD FULL" mark is displayed.
h). Press MEM key for 3 seconds to exit this mode, the recorded block
number "REC xx" is displayed.
i). The recorded data only download by PC, can not recall display by
meter.
2. Record data with preset start time
Perform setting the real time. (refer to 6-5)
a). Press
b). Press S key for 3 seconds to enter the setting mode, the "SET" and
"DATE" marks are displayed.
c). Press S key 8 times to enter the preset start time selecting mode,
the "STAT A M" mark and the flicking number of year are displayed.
d). Using key to position the cursor to the desired date and time
element to adjust.
Using
20
key to turn on the meter.
key to cycle select the interval time.
key to turn on the meter.
key to setting the selected date or time element value.
05/24/18 Version No. 00